catalog

2016-07-19
Best universal manual q35y ironworker machine

Best ironworker machineuniversal ironworker, q35y ironworker, manual ironworker needs eight preparations before being started.
Combined punching and shearing machine is than force is widely used in machining a shear configuration, it can cut the thickness of the steel plate material. Shearing machine is divided into common flat cutting, slitting and shock cut three kinds of model. Shearing machine is to use much. Less than 10 mm thickness shear plate shears for mechanical transmission, more than 10 mm for hydraulic transmission. Usually use pedal or buttons to use as a single or continuous cutting metal. 
Operation of the shearing machine should be ensured:
1.Carefully before operation raided the various parts of the shearing machine is normal, electrical configuration is in good condition, the lubrication system is smooth; Clean the table and the surrounding decoration something, such as measuring debris and marginal waste.
2.Don't let one person alone with shearing machine operation, it should be 2-3 people to reconcile material, dimension precision control and take the material, etc., and determine the unified command by one person.
3.According to the defined cutting plate thickness, mediation of plate shears scissors gap. No shear at the same time two kinds of different specifications, different material of sheet metal; Shall not fold material shear. Shear sheet for smooth appearance, no shear unable to compress a narrow sheet.
4.Shearing machine belt, flywheel, the gear and shaft parts must shield.
5.Shearing machine of the flywheel, gear, shaft, tape and other activities department should be set shield.
6.Can't cut the material of the quenching far never allow tailoring skill more than across the shears.
7.Decoration fence, to protect the operator's hand into the scissors sets in the area. When things do not pick up waste on the ground, to avoid the fall of workpiece wounded.
8.Best ironworker machine operator feeding mouth fingers away from the scissors link should be at least 200 mm distance outside, and leave the clamping device. The decoration on the shear the trigger protective barrier can't hold off parts of the operator's eyes, but can't see the cutting. Homework after inoculation angular stuff, the operator should be timely cleaning, defend was stabbed, incision.

We are professional manufacturer of hydraulic ironworker machine. Welcome to our factory. If you are interested in our machines, just send us an email. (anson@sinokd.com; john@sinokd.com)

   | sitemap.html | sitemap.xml | Privacy Policy